Published
October 28, 2026
Why are PVC prices rising? What drives them, by region
PVC prices can rise even when oil falls, because chlorine and power set the cost. How Europe, the US and China compare, and what to watch next.
Oil can fall for a month and the next PVC price notice can still go up. That looks odd until you remember what PVC is made of: more than half of every kilogram is chlorine, and chlorine is made from salt and a great deal of electricity.
For resin made through the ethylene route, PVC prices depend on two cost drivers that move on different clocks: ethylene, which follows oil or gas, and chlorine, which mostly follows the power price. The production route and local energy costs shape how strongly each affects the price, and duties and the number of sellers add a layer on top of production costs.
Most PVC buyers know the headline drivers. What follows puts them in one place, from salt to resin, so that the next price notice can be checked against changes in the underlying costs. It covers PVC resin; compounds add plasticisers, stabilisers and other additives, which have cost drivers of their own.
In short:
- PVC is about 57% chlorine by weight, and making chlorine takes a lot of electricity, which makes electricity an important cost driver alongside hydrocarbon feedstocks.
- Electricity makes up most of the cost of making chlorine in Europe.
- Europe makes its ethylene mostly from naphtha, the US mostly from ethane, and much of China’s PVC is made from coal. The same event moves each region differently.
- Duties and a small number of suppliers can move the price you pay without any change in production costs.
Have a PVC price notice or a 2027 offer on your desk?
How is PVC made?
In the ethylene route used in Europe and the US, PVC starts from two raw materials. Salt water is split by electrolysis into chlorine and caustic soda, and ethylene comes from cracking naphtha or ethane. Chlorine and ethylene react to form ethylene dichloride (EDC), which is turned into vinyl chloride monomer (VCM), which is then polymerised into PVC resin.
The European industry’s own description, from PVCEurope, follows the same steps and adds a figure worth knowing: roughly one third of all chlorine produced in Europe goes into PVC. By weight, the finished polymer is 57% chlorine and 43% hydrocarbons, according to a 2024 review of PVC in Europe published in Sustainability.
Most of what buyers call PVC is suspension PVC (S-PVC), the main resin type, used in pipes, window profiles, cable insulation and rigid film. Emulsion or paste PVC (E-PVC) is a less widely used resin type, found in coatings, flooring and synthetic leather. The two are made differently and are often priced and regulated separately, which matters later in this article.
Which inputs set the cost of PVC?
In the ethylene route, two inputs dominate: ethylene and chlorine. Ethylene follows oil or gas, depending on how it is made. Chlorine follows the electricity price, because electrolysis is its main cost. Caustic soda, made alongside chlorine, earns the producer money of its own and affects how much cost producers seek to recover through chlorine.
Chlorine is where European buyers are most often surprised. In its November 2023 note on production costs, Euro Chlor, the European chlor-alkali association, estimated electricity at 58–62% of the total cost of producing chlorine, with the electrolysis itself using 2.27–2.94 MWh per tonne of chlorine. Those figures describe chlorine production, not electricity’s share of the final PVC price. Even so, a rise in power prices reaches PVC through its largest ingredient by weight, even if oil and naphtha are flat.
Caustic soda complicates the picture. Chlorine and caustic soda come out of the same cells, so a producer makes both whether it wants to or not. When caustic soda sells well, the producer can accept a thinner return on chlorine and the PVC made from it; when caustic soda is weak, producers come under pressure to recover more through chlorine, whether or not the market lets them. For a buyer, this means the caustic market is worth watching even if you never buy a tonne of it.
If a supplier’s letter cites ethylene or energy, the method in our piece on what to check before you accept a supplier’s price increase applies directly: weight each input’s move by its share of the price before comparing it with the ask.
Why do PVC production costs differ between Europe, the US and China?
Because each region makes PVC from different starting points. Europe uses mostly naphtha-based ethylene and pays high prices for power. The US uses ethane, a by-product of its gas industry. Much of China’s PVC is made from coal through calcium carbide. The same event can push one region up and leave another almost unchanged.
Ethane remains the main cracker feedstock in the US, while Europe’s crackers run mostly on naphtha and several have closed under high energy and feedstock costs, as S&P Global reported in July 2025. Mainland China is the only region with major acetylene-based VCM capacity, according to S&P’s June 2025 report on vinyl chloride.
This is why a single headline can mean very different things for a buyer’s sources. An oil shock lifts European ethylene costs and does little to a carbide plant in China. A European power price spike raises the cost of European chlorine and leaves US and Chinese producers less affected, which in turn makes their offers into Europe more competitive. When a supplier explains an increase, it is worth asking which of these routes its plant uses.
What else affects the price buyers pay?
Import duties and supplier pricing power. Anti-dumping duties add to the landed cost of imports from specific countries, and a market with few local producers can hold prices up even when production costs fall. Neither shows up in a breakdown of production costs, so both are worth separating out when a price changes.
The EU imposed anti-dumping duties on suspension PVC in 2025 and opened a second investigation in 2026. In January 2025 the European Commission imposed definitive duties of 58% to 77% on imports from the US and 74.2% to 100.1% on imports from Egypt.
As of October 2026: in September 2026 the Commission opened a new investigation into suspension and mass PVC from China, South Korea, Mexico and Taiwan, according to Germany Trade & Invest, the German government’s trade agency. Emulsion PVC is not covered. The Commission has 14 months to conclude, and it has ordered customs registration of these imports from 27 October 2026, which allows duties to be collected later on goods imported from that date if the investigation finds dumping and the legal conditions are met. For anyone buying 2027 volumes from those origins, a low offer may carry a duty that isn’t on the quote. Customs collects it from the importer; whether the cost is passed on to you depends on the commercial contract.
Duties also change the behaviour of local producers. With fewer competitively priced imports, European sellers face less pressure to pass on falling input costs. A price that holds while ethylene and power ease can have several causes, including purchasing contracts, inventory bought earlier and delayed price adjustments. Weaker import competition is one of them.
What should PVC buyers monitor before the next price reset?
Ethylene, power, caustic soda, import offers and trade cases each affect PVC in their own way, so it is worth watching all of them rather than waiting for the next notice. How much warning they give depends on how your supplier buys its feedstock and how your own contract resets the price, including the review frequency and any index-based formula.
- European ethylene contract prices, and crude and naphtha behind them.
- Power prices in the countries where your suppliers’ chlorine is made, including forward prices for the coming months.
- Caustic soda prices. Weak caustic revenue puts pressure on producers to recover more through chlorine and PVC.
- Import offers from the US, Asia and Turkey, which show how much competition European producers face.
- Trade cases: new investigations, registration notices and the dates by which provisional duties are expected.
- Construction activity, the largest end use for rigid PVC; S&P names construction as a significant demand driver.
The specialty chemicals piece on cost stacks with five moving parts covers the same problem from the converter’s side, where several of these inputs reset on different schedules.
Keeping this current for what you buy
For one grade from one supplier, a list of these inputs and a spreadsheet can help assess the last price change. Keeping it current across every grade and origin is harder, and explaining the past only tells you why PVC prices moved. Deciding when to commit also depends on where ethylene, power and caustic soda are likely to go next. If a supplier has offered to fix your price for 2027, our piece on whether a fixed-price offer is worth the premium works through the break-even.
Sybilion helps industrial buyers decide what to pay for the materials they purchase, and when to commit: accept, counter, lock or wait. For the materials it covers, it keeps this kind of breakdown current, models what the price should be and where it is likely to head, with the uncertainty stated as a range, so the decision rests on evidence your team can defend. It works alongside the systems you already use.
Check your next PVC price before you commit.
Frequently asked questions
Why doesn’t the PVC price follow oil?
Because oil is only one influence. Its direct influence on feedstock costs depends on the production route; much of China’s PVC uses coal-based acetylene instead. The chlorine side depends on electricity, and market conditions such as imports and demand add their own pressure. When power and oil move in opposite directions, PVC prices can move against oil.
What is the difference between S-PVC and E-PVC?
Suspension PVC (S-PVC) is the main resin type, used in pipes, profiles, cable and rigid film. Emulsion or paste PVC (E-PVC) is a less widely used type, found in coatings, flooring and synthetic leather. They are made by different processes, often priced separately, and can be treated differently in trade cases: the EU’s 2026 investigation excludes E-PVC.
Why does PVC often cost more to make in Europe?
European producers make ethylene mostly from naphtha rather than cheaper ethane, and they pay high electricity prices for the chlorine side. Both raise the cost of the two main ingredients. Duties on some imports then reduce the competition that would otherwise push European prices down.
Can an anti-dumping case affect PVC that is already contracted?
It can. Imports from China, South Korea, Mexico and Taiwan have been registered since 27 October 2026, so duties may later be collected on goods that entered before provisional duties applied, if the legal conditions are met. Customs collects the duty from the importer; whether the cost reaches you depends on who imports the goods and what the contract says about duties, so it is worth checking delivery terms for any volumes from origins under investigation.
Explore more customer stories
Frequently Asked Questions
What data do you use?
Each data source has to pass an extensive verification process before it is used in our analysis.
Each data source has to pass an extensive verification process before it is used in our analysis.Each data source has to pass an extensive verification process before it is used in our analysis.
How accurate are your trends?
What security measures do you use?
All data we used is anonymized and doesn’t contain any reference to customers or otherwise.
What do you mean by explainable?
Can I confidently share my data with you?
We handle data with care and apply the latest security and hosting standards.

